Get to know heat pumps.
How they work, what they cost and what they could mean for your home — in plain English.
How does a heat pump work?
There’s heat in the outside air and ground even when it feels cold. A heat pump collects that heat, raises its temperature and passes it into your radiators or underfloor heating. It works like a fridge in reverse, in four steps:
- Evaporation. A refrigerant liquid absorbs heat from the air (blown over by a fan) or the ground (through buried pipes), turning into a gas.
- Compression. An electric compressor squeezes the gas, which makes it much hotter.
- Condensation. The hot gas passes its heat to your home’s water circuit, warming your radiators and hot water.
- Expansion. The refrigerant cools right down through a valve, ready to collect heat again.
How efficient are they?
Because a heat pump moves heat rather than burning fuel, every unit of electricity can give you three to four times as much heat. An A-rated gas or oil boiler turns about 90% of its fuel into heat.
Efficiency drops a little in very cold weather, so look for the Seasonal Performance Factor (SPF) — a year-round figure your installer should calculate for your home, based on local temperatures and your radiators, before any work starts.
Which type suits my home?
Air source heat pumps
Ground source heat pumps
Air-to-air heat pumps
Most systems need space for a hot water cylinder, and some radiators may need upgrading to larger ones.
How much do they cost to install?
- Air source: around £12,000.
- Ground source: around £15,000, or up to around £57,000 if a borehole is needed.
Your price depends on the size of your home and how much your current heating needs adapting. Grants can reduce this — see the Boiler Upgrade Scheme for England and Wales — £7,500 towards an air or ground source heat pump, with an extra £1,500 until March 2027 for homes heated by oil or LPG with no mains gas connection — Home Energy Scotland or Northern Ireland guidance.
Will it save me money?
It mostly depends on what you’re replacing. Heat pumps are generally cheaper to run than most other fuels. Against a newer gas or oil boiler they won’t always be cheaper, because electricity costs more per unit — but a heat pump time-of-use tariff makes saving more likely. Savings are not guaranteed.
Energy Saving Trust estimates for a typical three-bedroom semi-detached home, per year:
- Replacing an old (G-rated) gas boiler: save around £260 with an air source heat pump, or £490 with ground source.
- Replacing a new (A-rated) gas boiler: roughly break-even with air source, or save around £40 with ground source.
- Replacing old electric storage heaters: save around £1,200 with air source, or £2,000 with ground source.
If you disconnect from gas entirely, you also stop paying the gas standing charge — around £108 a year on average.
Do I need planning permission?
Usually not — most installations count as permitted development. Listed buildings and conservation areas are exceptions, so check with your local council. Your installer should also let your local electricity network operator know.
What should you compare?
- Total installation cost, including any radiator and cylinder upgrades.
- System size and the SPF behind any running-cost estimate.
- Installer qualifications, warranty, servicing and aftercare.
- Funding eligibility and who will handle the application.
Figures from the Energy Saving Trust’s in-depth guide to heat pumps and MoneySavingExpert’s heat pump guide.
Compare Free Heat Pump Quotes